top of page
The 10ft lengths of pipe stock were cut to length. A saw, guide, clamps and table were used.
The cut parts had to be cleaned and
sanded before applying the ABS glue.
Goggles and gloves were used
while handling the toxic glue.
The glue was applied in a well
ventilated area.
The completed rack came out to be within the desired dimensions.
Construction
Construction was conducted in winter quarter of 2015. For this phase, various lengths of pipe had to be cut. Long peices were cut for the legs and verticle post and short pieces to act as couplings. Six holes were drilled in the assembly for easy breakdown and storage. Great care was taken in measurement so that no pipe was cut the wrong length.
Cutting
Finished Parts
Completed Rack
Safety
bottom of page